TDK Life on Record Support
Support Home  |   Contact Support  |   Ask A Question
A33 Wireless Weatherproof Speaker - Pairing a Device
Reference Number: AA-00374 Views: 35227 Last Updated: 2014-11-26 11:12
What is the procedure for pairing a device to the A33? 

The pairing process for the A33 is in the Quick Start Guide and also listed here:

 
     
  1. Turn the A33 on; the previously listened to source and volume will be selected.
  2.  
  3. Press the Bluetooth button on the A33 to select Bluetooth mode.
  4.  
  5. Press and hold the Bluetooth button for approximately three to four seconds until the Bluetooth indicator blinks rapidly to make the speaker "discoverable."
  6.  
  7. On the host Bluetooth device (e.g. smart phone, tablet, etc.), enable Bluetooth in the settings menu and select "A33" from the device list.  If the Bluetooth device asks for a passkey, use "0000".  Some Bluetooth devices will ask to accept the connection.  If the units are paired properly, the speaker will beep and the Bluetooth indicator will light solid blue.  If it failed, the Bluetooth indicator will blink slowly.
  8.  
 

IMPORTANT: After step 3, you have two minutes to pair the units.

 

Note:  After you pair a device, this A33 will remember it for future use (for a total of six devices.)

 

If this procedure is not successful, try a reset of the A33.

  
Quick Jump Menu






Copyright © 2014- Imation Corp. All rights reserved.